Bunny Trap

Trapping a bunny is never easy but with our help you can find out how to make one with just home materials. My group and I did this two times and it \In this instructable we will show you step by step on how to make a bunny trap.

• Flat cardboard that is 16 x 12
•  A box that is 10 x 10 and a height of 12 inches without a lid
• Cardboard lid that is 9.5 x 9.5
• Flat cardboard that is 22 x 12 
• Four pieces of cardboard that is 3 x 20 
• Rolled flat cardboard that is 7 x 20

• After making sure you have all the items you need, you need to take the flat cardboard and place it down in the work environment you're working in.
• You will then take the box and put it whichever side you want and tape it or glue it down from all the bottom. 
• You will then take the lid that would go in the top and make sure it fits loose. 
• Cut 3 holes in the side where it will be attached in the top of the box where you cut out the lid. 
• Make 3 holes in the side of the box where the lid will be attached.
• Cut out 3 pieces of yarn (2 inches at least )
• You will then have someone hold the lid or flat lid so someone else can put the yarn through the three holes of the box and lid. Tie a knot and make sure it's secured.

•    After that, poke a hole in the center of the lid and get a yarn that will reach a foot long up so it can be attached to the other part of the bunny trap.
• Tie a knot at the end of the yarn into the hole making sure that it's secure.
• For the ramp as you can see in the picture it only has to be folded a bit so the bunny still has “support” in the top but will actually fall in. 
• You will only tape the sides so the tape doesn't smooth out the top.
• The next part is the taller part which you will need to find a flat cardboard that you can cut in half and then fold both of them in half. ( Hotdog style)  
• To secure them tape both of them separately 
• You will need a taller flat cardboard that can be rolled into a cylinder and taped to be secured 
• To secure and put everything together, get a smaller and short box that's 3x4 inches and tape it down into the flat surface at the very end so it's in front of the bigger box.
• Put both of the same pieces in the sides of the box vertical and tape it to the box
• You will have to poke a hole with the same pencil on both of them in the top but that's an inch down from the top.
• Get a pencil and poke a hole in the middle of the cylinder which will now go between both of the pieces. 
• Make sure the pencil is put into all the holes and left there 
• Make two holes in both of the ends of the cylinder 
• The one that's closest to the bigger box will have the string from the lid that's in the middle attached to it 
• The farthest to the back will have a small basket with the weight that's balanced so the lid won't be all the way down but touching the extra part of the ramp
• To make the small basket just get a smaller box that won't be heavy on the lid.
• Poke holes in the box so the bunny doesn't suffocate

Now that it's done you can design it anyway you want :)

Creators: Naomi Z. & Estephania V.