Bunny Trap

This is how you make a simple bunny trap using 3 simple machines

Cardboard Box

2 colored pencil

Pulley Tape

1 clothespin

Cardboard

String

Box cutter

Cut a square on either side of the box to where you would have a flap with an incline

On the other side of the box on the corner or maybe towards the middle you tape the two colored pencils snd tape them being like 4-5 inches apart add your mechanical pencil in the middle in the pulley and make sure the pulley turns

Inside the box towards the flap like in the middle glue the clothespin at the box and put a cardboard square on top of the clothespin but do not cover the pin after tape it and make sure its strong enough

Cut a long piece of string and put it through the clothespin and a small whole on the right side of the flap and put the string through it and the grab a water bottle and make sure it is not filled all the way and tie it from the top and then put it through the pulley and now your bunny trap should work

Use construction paper and hot glue and glue it all around the whole box and just decorate it around and a sun grass and Easter eggs