Bunny Box

by flyerpeople in Living > Pets

1714 Views, 9 Favorites, 0 Comments

Bunny Box

PICT0322.JPG
This is a video of the Bunny Box in action.

Your Materials

PICT0322.JPG
You need the follow materials to make your very own Bunny Box:

1. A large fairly cubical box to form the main part of the habitat.
2. Soft rags and clothes
3. An orange juice carton
4. A long box in the shape of a rectangular prism
5. A strawberry/ blueberry crate
6. A glue gun
7. Glue sticks (The type that go into the glue gun!)
8. A macaroni box

*These are all easily acquired materials that are in the average recycling bin (Except for the glue gun & glue).*

The Main Box

PICT0326.JPG
The main box will be constructed out of the cubical box you acquired. To do this first cut an arching doorway on the front face. Then proceed to cut one window along another side that folds out to the side. This way it is possible to close the window. Finally, line the bottom of the box with all the soft goodies. (i.e. T-Shirts, washcloths, etc.)
Note: Be sure the window is small enough where your animal cannot fit through.

The Add-On: Part 1

PICT0326.JPG
The add-on is the piece that you may lay in front of the main box to increase your animal's play area. To begin with, take the large, long box and cut a large hole, the size of your fruit container, on one of the long sides. Then proceed to open both ends of the box. 

The Add-On: Part 2

PICT0324.JPG
Next, to construct your "Bunny Window" cut the lid off of your fruit container and set it aside. Then proceed to hot glue the large half of the container onto the box, over the hole. This will not only serve as a window, but also as extra space for your animal.

Afterwards, construct the staircase. Depending on the size of your box, the stairway should go three-quarters of the way up the box. You should make it out of the orange-juice carton and be sure it is the correct width for your animal. Once you have constructed a staircase shape, cut a rectangular piece of orange juice carton the width of the staircase and the height of the box. Then proceed to glue it to the far side of the staircase. (The one you're not glue to the box.) Now glue it on.

The Add-On: Part 3

PICT0323.JPG
PICT0325.JPG
These are the final two stages of the box. 

Take the macaroni box and cut it in down the middle of the face. Seal off the back end. On top cut a "window" (open on 3 sides) that will serve to hold Timothy Hay or other treats in place.

Finally, take the top of the strawberry carton and glue it to the end of the staircase.

ENJOY!