Bulls Light

This is easy to do all you need is
Jig saw
Sander
Power drill
Finished nails
Wooden Drill bit
Paint: bull black,bull red and white
Liquid nails
caulk gun

Draw the template any size you wish or Google search I did my own template. I only draw one side because it's the same on both sides that way it's identical. Trace it then flipped it over.

I traced the whole thing it on 1/4 plywood the whole . Then cut the forehead and mouth and the black from the mouth on 3-4 plywood. To give it a 3D like look. I used a jig saw to cut it out and liquid nail to hold it then sand and paint it

Just do your best to paint it

You can add any rope light or LED light to the back and a hook to hold it up