Building Sawhorses Done in 14 Minutes
1497 Views, 6 Favorites, 0 Comments
Building Sawhorses Done in 14 Minutes
Building sawhorses - Useful home-made literally from firewood, a door hinge and a piece of chain. Everyone can assemble, you will need a minimum of tool.
I Still Have Trimmed Boards, Laid the Floors, Took the Board 150 * 40. Making Goats From Such a Board Will Be Too Cumbersome.
Therefore, We Measure Out 100 Mm.
and We Open the Board, There Will Still Be Bars of 50 Mm. 😉
We Twist, Adjust to Size, I Did 80 Cm. for My Purposes, This Is the Ideal Height.
We Take Two Boards and Make a Cut at 30 Degrees.
We Connect Them Together Using a Door Hinge.
We Take a Chain, You Can Replace It With a Cable, But I Have Long Had 5 Meters of This Chain Lying Around.
It Will Be in the Role of a Limiter in Width, Legs Made at 30 Degrees.
on Both Sides We Install the Crossbar.
You Can Add a Lower Crossbar, But for My Tasks, It Is Not Required.
Here Is Such a Convenient Option, They Add Up Quickly, Reliable, You Can Do It in Literally 30 Minutes.
And So They Look in a Working Position.
Withstand a Load of More Than 100 Kg. Already Verified Personally.
Video Version
If you liked this project, then be sure to subscribe to my YouTube channel and check out some of my other Instructables.