Build a Dynamic Mic Pre-Amp

by samtechpro in Circuits > Audio

12369 Views, 47 Favorites, 0 Comments

Build a Dynamic Mic Pre-Amp

Circuit 1.bmp
Hi Guys..!!
You're welcome to "Sam Technology Professionals"

This project is all about a Dynamic Mic preamp which has very good gain. And the sound of output will change the way of your broadcast or recording.
This is good for ribbon microphones as well. I tested a long ribbon microphone and it works well. One thing i mentioned everywhere is that it needs an ultra clean power supply that's what i say in video and i wrote about it on my BLOG.
If you don't know about creating power supplies or filtering the power supply then you can use 9v battery for it. Batteries supplies the clean DC. Well here i attached circuit diagrams. I design one as basic and in other i just added a 10K pot to control the output gain.

I also attached the video tutorial that is all about this pre-amp.

Components are very simple and are easily available in the market.

__________________________________________

Don't forget to write your feedback here or at my blog or youtube video. Or you can also ask me questions about it.

Have a wonderful Day..!!