Build a Cheap Rc Boat and Upgrade With Fpv

23450 Views, 106 Favorites, 0 Comments

I'll explain how I built a boat rc from not much it works really well and is very stable I think do evolve again ......

Materials Used

- plastic board

- hot glue

- motor of an old rc car

- servo ( hitec )

- wire

- transmitter and receiver ( for me its an frsky fs th9x )

for the FPV upgrade

- video transmitter and receiver ( 5,8ghz 200mw boscam )

- camera ( gopro)

- goggle (quanum v1 )

First I took a sheet of plastic in the trash after I cut out to obtain a form of flattened boat

I glue together and add the back

then I put the old engine , the steering servo (hard to settle ), the receiver , the controller , cabler all ...

I add the propeller ($ 1 on amazon ) set on a threaded rod

for fpv I set the camera, the emeteur I add a compass for more realism ! a piece of plastic bottle to the front wind !

thanks !!!!

has soon for another idea