Build Any Motor Belt With Used Car AC Belt
784 Views, 2 Favorites, 0 Comments
Build Any Motor Belt With Used Car AC Belt
![IMG_20200501_144613.jpg](/proxy/?url=https://content.instructables.com/FAD/52PS/K9XCVBR2/FAD52PSK9XCVBR2.jpg&filename=IMG_20200501_144613.jpg)
![good-serpentine-belt-large.jpg](/proxy/?url=https://content.instructables.com/FNF/R0IZ/K9XCVBS6/FNFR0IZK9XCVBS6.jpg&filename=good-serpentine-belt-large.jpg)
I was struggling with an ancient massage chair, the model was of 90's , no brand, no specification, just trashed in deposit for years because of the belt worm up , as shown.
Cut the Belt
![IMG_20200501_144653.jpg](/proxy/?url=https://content.instructables.com/FL5/CKCH/K9XCVBR3/FL5CKCHK9XCVBR3.jpg&filename=IMG_20200501_144653.jpg)
![IMG_20200501_144705.jpg](/proxy/?url=https://content.instructables.com/F5W/OUWU/K9XCVBR6/F5WOUWUK9XCVBR6.jpg&filename=IMG_20200501_144705.jpg)
![IMG_20200501_144727.jpg](/proxy/?url=https://content.instructables.com/FM8/24VV/K9XCVBR7/FM824VVK9XCVBR7.jpg&filename=IMG_20200501_144727.jpg)
Car AC belts are changed very often, by the total mileage and age, sometimes it just a little old, still work with a little noise as it becomes slippery.
You can see the picture, as the friction part matches (almost) and leave a small space in between, I can use the metal threat to build the bond.
Easy But Need Drill a Hole. and a Paper Clip
![IMG_20200501_155119.jpg](/proxy/?url=https://content.instructables.com/FUN/IKLA/K9XCVBR8/FUNIKLAK9XCVBR8.jpg&filename=IMG_20200501_155119.jpg)
![IMG_20200501_155113.jpg](/proxy/?url=https://content.instructables.com/FLZ/0XC4/K9XCVBQZ/FLZ0XC4K9XCVBQZ.jpg&filename=IMG_20200501_155113.jpg)
I tried sewing the belts, as they are very strong, i gave up in the 3rd try.
Only a paper clip will do the job, however that metal is little weak too.
you can find whatever material you think goes.
TA TA ! It Works.
![IMG_20200501_155148.jpg](/proxy/?url=https://content.instructables.com/F82/Q685/K9XCVBR9/F82Q685K9XCVBR9.jpg&filename=IMG_20200501_155148.jpg)
If you like this project, pls put like.