Breadboard Cable 4x Size
![Zrzut ekranu 2022-06-19 o 23.08.39.png](/proxy/?url=https://content.instructables.com/F55/N5IS/L4LBLTRX/F55N5ISL4LBLTRX.png&filename=Zrzut ekranu 2022-06-19 o 23.08.39.png)
As I wanted to join the "Go Big" competition I decided to scale up a popular thing amongst makers and electronics people - a jumper wire.
Supplies
![Zrzut ekranu 2022-06-19 o 23.11.52.png](/proxy/?url=https://content.instructables.com/F02/ER5N/L4LBLTVS/F02ER5NL4LBLTVS.png&filename=Zrzut ekranu 2022-06-19 o 23.11.52.png)
- multimeter cables
- glue
- 3D printer
Creating 3D Model
![Zrzut ekranu 2022-06-19 o 23.12.50.png](/proxy/?url=https://content.instructables.com/F7Z/VTN7/L4LBLTXA/F7ZVTN7L4LBLTXA.png&filename=Zrzut ekranu 2022-06-19 o 23.12.50.png)
I designed and scaled up the model in Fusion 360.
Printing
![Zrzut ekranu 2022-06-19 o 23.14.08.png](/proxy/?url=https://content.instructables.com/F2I/HPO2/L4LBLTZZ/F2IHPO2L4LBLTZZ.png&filename=Zrzut ekranu 2022-06-19 o 23.14.08.png)
Next, I printed everything out of black PLA with no support material. Other settings do not matter.
Getting the Pins
![Zrzut ekranu 2022-06-19 o 23.15.52.png](/proxy/?url=https://content.instructables.com/FJ8/DJJ9/L4LBLU5C/FJ8DJJ9L4LBLU5C.png&filename=Zrzut ekranu 2022-06-19 o 23.15.52.png)
Then I hit the plastic part a few times with a hammer to remove the metal pin.
Soldering
![Zrzut ekranu 2022-06-19 o 23.17.23.png](/proxy/?url=https://content.instructables.com/F3M/0KEG/L4LBLU98/F3M0KEGL4LBLU98.png&filename=Zrzut ekranu 2022-06-19 o 23.17.23.png)
![Zrzut ekranu 2022-06-19 o 23.17.51.png](/proxy/?url=https://content.instructables.com/FZR/448M/L4LBLU9Y/FZR448ML4LBLU9Y.png&filename=Zrzut ekranu 2022-06-19 o 23.17.51.png)
![Zrzut ekranu 2022-06-19 o 23.18.06.png](/proxy/?url=https://content.instructables.com/FDA/CLU5/L4LBLU9Z/FDACLU5L4LBLU9Z.png&filename=Zrzut ekranu 2022-06-19 o 23.18.06.png)
I removed insulation from the multimeter wires and soldered them directly to the pins.
Almost Done
![Zrzut ekranu 2022-06-19 o 23.20.15.png](/proxy/?url=https://content.instructables.com/F36/M9P2/L4LBLUG6/F36M9P2L4LBLUG6.png&filename=Zrzut ekranu 2022-06-19 o 23.20.15.png)
![Zrzut ekranu 2022-06-19 o 23.20.32.png](/proxy/?url=https://content.instructables.com/F2E/JLK7/L4LBLUGS/F2EJLK7L4LBLUGS.png&filename=Zrzut ekranu 2022-06-19 o 23.20.32.png)
Now, I put the metal pins through holes and secured everything with a bit of glue.
Et ViolĂ
![Zrzut ekranu 2022-06-19 o 23.23.36.png](/proxy/?url=https://content.instructables.com/FW9/IOMP/L4LBLV10/FW9IOMPL4LBLV10.png&filename=Zrzut ekranu 2022-06-19 o 23.23.36.png)
Now you can plug the cable into your giant breadboard. What... you don't have one? Watch out for my next Instructable then. Cya!