Box-head/ Materials and Tools Required

Materials used:

• 3mm Baltic Birch Wood (.115" thick)
• Glue
• Rubber Bands

Tools used:

• Universal Laser System
• Autodesk 2014
• Corel Draw

*The autodesk drawings were converted into a dxf file and then used in Corel which is the drawing program used for the laser.

Autodesk 2014 drawings download is located at the bottom of the page.

Intro:

This is a simple box-head you can create using these drawings to print it out in a laser. These drawings require autodesk or auto-cad already downloaded on your computer (you can always get a 30-day free trial). This box-head is a blank canvas you can embellish it any way you like. Also it would make a cool desk piece or just something to do when your bored.

Align all the parts and use rubber bands or glue to hold them together depending on your preference.

The arm pieces and the body only require the circular joint and rubber bands to be held together

The bottom pieces require glue to be held together and then the pieces are glued into the bottom notch of the torso.

This box-head can be a creative project if you let it. This was just a tutorial showing the designs and how to assemble the box-head.