​Bowl for Dogs

Bowl for dry dog food.

The holes in the bowl are made so that rainwater flows out

3D printer with print area 300x300 mm

Filament PETG

I use that settings for print:

• Nozzle diameter: 0.4
• Extrusion width: 0.36
• Layer height: 0.2
• Top layers: 5
• Bottom layers: 2
• Outline/Perimeter shells: 2
• Use skirt/brim: yes
• Infil percentage: 35%
• Support: no
• Temperature primary extruder: 225 C
• Temperature heated bed: 70 C
• Cooling: starting from 3 layer, 50%
• Speed: 120 mm/s

The stakes is needed to fix the bowl on the ground.

Dogs like to play with a bowl and then the bowl is hard to find.