Bowl Holder

This tutorial will show you how to make a simple bowl holder for your dog or cat

Material: 2 Lengths .125" Steel

Tools: Wire Cutters, 30-Degree Wedge, Parallel Clips, Wire

Time: 30 minutes - 1 hour

Skill Level: Medium

Turn the wire upwards 30 degrees immediately after each of the two short lengths have been bent; we cut a 30-60-90 wedge out of foam core but you could also use a laser cut or 3D printed part...or even just eyeball it.

You'll end up with two rotated halves and a dodecagonal base.

Clip them together using some 3D printed or purchased parallel clips.

Place a bowl that fits snug, put in some treats and let your dog enjoy it!