Boot Scrapper
This simple Boot Scrapper can easily be made from a single piece of plywood by attaching crown beer bottle tops to it.
Mud is removed from the soles of boots by standing on the board and shuffling your feet back and forward.
Supplies
Suitably sized wooden board
Crown bottle tops
Self taping screws
Cut Out a Rectangle From Plywood
- Cut out a 28 cm by 32 cm rectangle from a piece of 15 mill plywood.
- Drill a suitable sized hole through a crown bottle top and fix to the plywood with a self taping screw. Self taping screws saves you from having to pre-drill holes into the plywood.
Screw on More Crown Bottle Tops
- Continue adding crown bottle tops until the board is completely covered, leaving a small gap between each bottle top