Boot Projectors


I got invited to the Bangkok Mini-Maker Faire. My usual wearables are not really suitable for a family event so I had to come up with something small enough to fit in my luggage and simple enough I could make it with only a few days notice and no time to troubleshoot. So this does not really count as a build- it was more of a last minute hack. The effect looks really good even if actually knowing how simple it is takes away from it a bit.
Normally Chinese almost never go showing the flag but I figured since I was the first Chinese Maker girl to exhibit outside of China I needed to represent :-D (I asked the organizers if it would be ok first of course)
3D Printing

3D print the plastic wedge, it keeps the projectors pointed out at a slight angle. Really any setting is fine, they don't need to be very strong and the lighter the better.
Downloads
Pocket Clips and Self-adhesive Tape


These are what I used: https://www.niteize.com/product/Total-Eclipse.asp
These would probably work also: https://www.aliexpress.com/item/3PCS-Outdoor-Mini...
Logo Projector



Car LED logo projector: https://www.amazon.com/Wireless-Universal-Projecti... You can also find the same model on Aliexpress, tons of different artwork available (Hello Kitty, Batman etc) if you look. The logos are printed on a slide that just fits in the top so worth buying a few slides to try out if you can.
The projectors come with self-adhesive tape cut to size so you won't need to buy any to attach to the plastic wedges. Just clean both surfaces first with an alcohol wipe.
Final Result!

Not much to it, but the effect is cool and I think it's worth iterating on. If the cost of video projectors goes down it would be a pretty neat thing to try.
►Twitter: https://twitter.com/RealSexyCyborg
►My Photo Albums: http://sexycyborg.imgur.com
►YouTube: http://www.youtube.com/c/SexyCyborg
►My FAQ: http://pastebin.com/V3474kYs