Book Dryer
There are times when a very interesting book reaches you in a very bad condition. The book needs to be dried, or at least ventilated. This is what this device was created for.
Supplies
Fan, 4 long bolts and 8 nuts, 3 sheets of plastic, adhesive tape.
We Glue Sheets of Plastic Together
We glue the sheets of plastic together with a gap, so that the adhesive tape forms flexible hinges.
We Make Sure That the Sheets of Plastic Form an Equilateral Trapezoid
Plastic can be replaced with thick cardboard or thin plywood.
In Order for the Air to Circulate - We Put the Fan on the Legs Made of Bolts
The main thing here is simply to raise the fan so that it can draw in air.
We Hang Up the Book
If necessary, you can choose individual fragments from the book.
We Turn on the Fan
If necessary, you can move the fan a little to the side.
We Make Sure That the Fan Blows All the Pages of the Book Well
If necessary, you can move the fan a little to the side.
We Dry the Book Until It Can Be Put on the Shelf
