Book Case
Hello Fellow Instructables
This is my Diy Book case
This is my Diy Book case
Materials
For this u need a few tools
Table saw
Hammer
Nails
Sand paper
Nail gun
Screws
Bolts
Router
Glue
Wood cut from a 8x 4 pc. of Pine wood
And trim wood for the decorative pcs
Table saw
Hammer
Nails
Sand paper
Nail gun
Screws
Bolts
Router
Glue
Wood cut from a 8x 4 pc. of Pine wood
And trim wood for the decorative pcs
Book Case
My book case it's 7 feet tall by 14 inches deep
And 48 inches Wide
It has Bolts on the bottom so it can be easily moved
The top has decorative trim. See pictures
the sides top and bottom where cut from a 8x4 sheet of ply wood the rest of the pcs i used pine wood
the back was made using a sheet of 3mm ply wood.
the decorative pcs used on the top was pine,
after the whole thing was put together i sand it and put a light colour stain to it.
this is my second wool case the 1st was done using Oak wood,