Bonnet From Old Dress
![image.jpg](/proxy/?url=https://content.instructables.com/FWP/4RXP/IM5WKSPK/FWP4RXPIM5WKSPK.jpg&filename=image.jpg)
![image.jpg](/proxy/?url=https://content.instructables.com/FS4/MNZD/IM5WKSPZ/FS4MNZDIM5WKSPZ.jpg&filename=image.jpg)
If you have an old dress laying around and want to reuse it here is a fun idea!
Find an Old Dress
![image.jpg](/proxy/?url=https://content.instructables.com/F3D/29QB/IM5WKP08/F3D29QBIM5WKP08.jpg&filename=image.jpg)
If you have an old dress (preferably with frilly Sleves then you are on your way!
![image.jpg](/proxy/?url=https://content.instructables.com/FEH/TI67/IM5WKPAV/FEHTI67IM5WKPAV.jpg&filename=image.jpg)
Hemming
![image.jpg](/proxy/?url=https://content.instructables.com/F6Y/0YTB/IM5WKPEB/F6Y0YTBIM5WKPEB.jpg&filename=image.jpg)
most likely the section you cut will need to be hemmed on one side so decide how large you want it ( for kitten I am doing 1 1/2") and hemm the side you cut.
Sewing Into a Circle
![image.jpg](/proxy/?url=https://content.instructables.com/FUG/KA71/IM5WKQF0/FUGKA71IM5WKQF0.jpg&filename=image.jpg)
![image.jpg](/proxy/?url=https://content.instructables.com/FBL/5Q3L/IM5WKQEZ/FBL5Q3LIM5WKQEZ.jpg&filename=image.jpg)
Next you need to sew together the bottom side( the smaller inner part that will go on the back of the head) it is ok if ther is a hole here a lot of bonnets are made with holes in the back. If hand stitching I would double thread and cross stitch to make sure it's strong. Make sure to hemm on the inside
Attaching Ribbon
![image.jpg](/proxy/?url=https://content.instructables.com/F9Y/BUVP/IM5WKSK3/F9YBUVPIM5WKSK3.jpg&filename=image.jpg)
![image.jpg](/proxy/?url=https://content.instructables.com/FPB/GEWP/IM5WKSKK/FPBGEWPIM5WKSKK.jpg&filename=image.jpg)
Next you need to sew on the ribbon (or peice of hemming off the dress as I did) to the bonnet so you can secure it on. You want to attach them on the inside of the bonnet to the hemming as shown.