Body Clip Pulls
Are you tired of hurting your fingers while trying to take the body off of your RC Car or Truck?
Well then this is the Instructable for you. It is a body clip pull that is made from old fuel tubing and some zip ties. if you have the items you can assemble one together is a matter of seconds.
Things you will need:
Fuel tubeing
Zip ties x2
A cutting tool
Well then this is the Instructable for you. It is a body clip pull that is made from old fuel tubing and some zip ties. if you have the items you can assemble one together is a matter of seconds.
Things you will need:
Fuel tubeing
Zip ties x2
A cutting tool
Step 1
Tie one of the zip ties thrugh the final hole of the body clip
Cut the end of the zip tie a bit longer than the fuel tubing (about 1cm more than the tubing )
Cut the end of the zip tie a bit longer than the fuel tubing (about 1cm more than the tubing )
Step 3
Slip in the fuel tubing on to the zip tie
Now zip the free end of the zip tie that is attached to the body clip. (look at the 2nd picture)
Now zip the free end of the zip tie that is attached to the body clip. (look at the 2nd picture)
Final Step =)
Trim the access plastic from the zip ties and you are ready to BASH!
Tanks to people in hpisavageforum.com for showing me this trick.
If u have a truck and are having problems these guys are always there to help you fix it .
Tanks to people in hpisavageforum.com for showing me this trick.
If u have a truck and are having problems these guys are always there to help you fix it .