Boba Fett Vans Display Stand
After moving into a new house and deciding I wanted a better way of displaying my Boba Fett Vans I figured why not make something? I wanted something fairly simple that would display the vans and the box and letting stress off the box since it is in such bad shape.
Supplies
This is what I used
Kraft corrugated
White Corrugated
Hot Melt Glue
Cad software
measuring tape
Design
First off I decided on shape, size, and how I wanted it to fit the theme of Boba Fett.
Cut Your Material
Next I cut out all my parts and got them ready for gluing. I used a cad table but you can use straight edge and knife to cut this out.
Glue Your Parts Together
Now I glued all the parts up. The circles stacked so the design was in a contrasting material and on the bottom side the "X" slit visible so that the base would fit in it. I decided to not glue the base in the "X" slit so I could take it off and collapse it in case I decided I wanted to store it away.
Finished
Finished, Now I was at the point I could display my Vans properly.