Board for Staining or Painting Projects

Today I will show you how I made a Paint/ Stain board, using a piece of plain 2 Foot X 4 Foot x 1/4" thick Pegboard. This is great to have around, for any of your Paint or Stain projects, you will see me use this over and over again. This keeps your project up about a 1/2" from the surface, so that you can paint or stain the edges, without it touching a flat surface.

You will need the following:

2' x 4' x 1/4" Pegboard

Hot Glue Gun

Hot Glue sticks

1000 or more 3/4" Long screws

With the Glue Gun on and hot, You might want to wear gloves for this, be careful. Apply a little Hot glue around the hole and push the screw thru the hole. The Hot glue, when cools down will hold the screws in place, now do this for all the holes, mine was over a 1000.

Please be Careful when using Hot Glue

As you can see in the above picture, I used this when making my Tic Tac ToeToilet Paper holder. I have used this Paint/Stain board several times, it is real handy to have around. I hope this helps somebody and as always, Thanks for checking out my Instructable.