Blowgun

by scottkiegan in Outside > Hunting

1251 Views, 13 Favorites, 0 Comments

Blowgun

16, 11:33 PM.jpg

Items Needed

16, 11:33 PM.jpg
16, 11:33 PM.jpg
16, 11:33 PM.jpg
16, 11:33 PM.jpg
-6ft 1/2in pvc pipe
-any kind of big nail you can find around your house
- camo tape
-foam
-zip ties
-bandsaw

Measure Shooting Tube

16, 11:33 PM.jpg
Measure to 24 inches long.

Cut Shooting Tube

16, 11:33 PM.jpg
16, 11:33 PM.jpg
16, 11:33 PM.jpg
Cut the tube where you marked it off at with bandsaw

Measure Left Over Pvc Pipe

16, 11:33 PM.jpg
Measure out 6 4" inch tubes for the extra ammo

Cut Ammo Holders

16, 11:33 PM.jpg
Make the cut with the bandsaw at the 4" inch mark.

Tape

16, 11:34 PM.jpg
Wrap camo tape around the shooting tube and ammo tube.

Zip Tie

16, 11:34 PM.jpg
16, 11:34 PM.jpg
Zip tie the ammo holders really tight to the shooting tube.

Foam

16, 11:34 PM.jpg
Cut foam into little squares

Nails

16, 11:34 PM.jpg
16, 11:34 PM.jpg
Insert the nails into the foam and cut down foam if it doesn't shoot nicely through tube.

Finish

16, 11:34 PM.jpg
Put everything together