Blood-Pack Clay Mini-Zombie Pellet Gun Targets!!!
by damianzuch in Living > Pranks, Tricks, & Humor
1649 Views, 10 Favorites, 0 Comments
Blood-Pack Clay Mini-Zombie Pellet Gun Targets!!!
"Hey Tina, we should probably clean the shop or do something really productive."
So Tina and I spent the evening making little fake blood-filled clay zombie targets and shooting them with pellet guns. It's really easy and quite fun so I thought I would share it with you.
The first step is easy - get some air-dry clay and make a fat little zombie body. Your sculpture doesn't have to be perfect, as long as it's tubby enough to hollow out a cavity for fake blood then it's fine (I just looked up "fat sculptures" and there are a hilarious amount of examples to model from).
Hollow out your zombie torso. I used a pen and just wiggled it around and made a cavity. Then fill the cavity with fake blood. YOU'RE SO CLOSE TO BEING DONE!!!!
Now make a little zombie head. Stick it on top of the zombie body. That's it! You've made a mini-zombie target!
So, I found that if you place a piece of white paper behind your mini-zombie you will get a much more visible spatter zone. You know what? I'm going to go shoot a video and upload it... don't go anywhere, I'll be right back!
******** time passes *************
OK! Check out this incredible video, slowed down in parts to ultra slow speeds, to give you a sense of what this is all about.
http://vimeo.com/m/113207824
OK, be safe! Remember, don't shoot pellets at yourself or other living things (the undead are ok). Wear safety protection and don't use anti-bacterial soap, it creates super viruses that will eventually turn us all into zombies (ask your doctor, it's true!).
Until next time, DAZU!!!
So Tina and I spent the evening making little fake blood-filled clay zombie targets and shooting them with pellet guns. It's really easy and quite fun so I thought I would share it with you.
The first step is easy - get some air-dry clay and make a fat little zombie body. Your sculpture doesn't have to be perfect, as long as it's tubby enough to hollow out a cavity for fake blood then it's fine (I just looked up "fat sculptures" and there are a hilarious amount of examples to model from).
Hollow out your zombie torso. I used a pen and just wiggled it around and made a cavity. Then fill the cavity with fake blood. YOU'RE SO CLOSE TO BEING DONE!!!!
Now make a little zombie head. Stick it on top of the zombie body. That's it! You've made a mini-zombie target!
So, I found that if you place a piece of white paper behind your mini-zombie you will get a much more visible spatter zone. You know what? I'm going to go shoot a video and upload it... don't go anywhere, I'll be right back!
******** time passes *************
OK! Check out this incredible video, slowed down in parts to ultra slow speeds, to give you a sense of what this is all about.
http://vimeo.com/m/113207824
OK, be safe! Remember, don't shoot pellets at yourself or other living things (the undead are ok). Wear safety protection and don't use anti-bacterial soap, it creates super viruses that will eventually turn us all into zombies (ask your doctor, it's true!).
Until next time, DAZU!!!