Blinking LED

In this project, we will be using Arduino to control LEDs to blink.

It's a very simple project to get started with Arduino. So let's get started...

to make this project, you will need

- Arduino Leonardo (x1)

- Jumper Wires (x3)

- LED (x2)

- 220 ohms resistor (x2)

- breadboard (x1)

connect GND to negative

connect the first one to pin 7

connect the second one to pin 6

attach the LEDs and resistors

https://create.arduino.cc/editor/yangemily/53a179cc-87fd-4a4c-8ea5-0d2120a9f970/preview