BlackJack (hacked IRig)

by olivergon in Circuits > Audio

3149 Views, 4 Favorites, 0 Comments

BlackJack (hacked IRig)

IMG_9187.JPG

I hated the way I had to use my iRig with the electric guitar and my smartphone because there were too many cables!!!!!!!

Basically, I found two main problems with the original design:

1.- I donĀ“t want to use a guitar cable because it is another thing to carry on when travelling

2.- The headphones cable is too short compared to the guitar cable, so at the end, you have to be very close to the desk while you are playing

So I decided to eliminate the need to use the guitar cable and convert the female plug of the iRig into a male plug.

I also needed to buy a female to a male extension cord for smartphone earbuds (3,5 mm with mic).

Now I just plug the BlackJack into my electric guitar and my earphones to the device. Then, using the extension cord I can put the smartphone on the desk with only one cable.

Step 1: Disassemble the IRig

IMG_9183.JPG

Step 2: Desolder the Female Jack Plug

IMG_9184.JPG

Step 3: Solder a New Male Jack Plug

IMG_9185.JPG

Step 4: Assemble Everything

IMG_9186.JPG