Black Hawk Egg Carton Glider

This is a fun and easy project for kids and adults!
I've adapted this project from Paul Billings' design.

- Styrofoam egg carton lid
- Marker and pen
- scissors
- ruler
- knife
- penny
- black paint
- Glider pattern:
http://www.wnit.org/outdoorelements/pdf/egg_carton_glider.pdf

Make two marks on the wings of the pattern, 1 and 3  inches from the inner corners of the tail, about a half in in from the edge.
We'll be using these marks later to make the wing flaps.

Cut the pattern out, and trace it on the inside of the carton with a marker. Carefully  cut the glider out with a knife.

Remember those marks we made on the pattern earlier?

Draw lines from those points straight down to the edge of the wing.
Place the template over the glider again, and use your knife to cut those lines into the glider.

Once the cuts are made, line up the inner points and score a lines with a pen and ruler to make the flaps.

You can color the glider however you want.
I opted for spray paint.

I sprayed mine in a pizza box to control the mess.

It might also look awesome to make small designs on the wings with a silver sharpie... maybe a skull and crossbones, and the words "DEATH FROM ABOVE"  LOL.

.

Add a penny in the slot near the nose for weight.
It should fit snugly.

Now go outside and throw!
Experiment with the flaps to make your glider preform turns and loops!