Bird Feeding Table - Reinvented

by bartworker in Outside > Birding

6190 Views, 91 Favorites, 0 Comments

Bird Feeding Table - Reinvented

DSC03127.JPG
DSC03121.JPG
DSC03105.JPG
DSC03173.JPG
DSC03247.JPG
This winter you'll do things different.
Instead of buying a new birds feeding table you'll make one, one that's different from all others (although not from mine but there's few chance we're neighbours).

This 'leaf bird table' is easy to make & weather-resistant.

Needs:
- a trunk
- some wastewood or a kitchen board
- some Alubond-style aluminium composite panels

Design & Cut

DSC02838.JPG
DSC02841.JPG
DSC02842.JPG
Organize two sheets of ALU-bond & get them together.
Design the leaf (in this occasion oak but I'm pretty sure banana must be nice also) & cut them both at once with a jigsaw.
Sand the edges.
Perforate the upper margin with a small drill.

Stitching

DSC02846.JPG
DSC02866.JPG
DSC02867.JPG
Ply both halves as much as needed that, once put together, they will be stitchable.
Use polyester rope to stitch them together. Double nots.
Seal with silicone (tape the sides of the seal zone to get this done properly).

Paint Job

DSC02987.JPG
Give it any color you want - aerosol paint is just fine.

Prepare the Leafstalk

DSC02895.JPG
DSC02896.JPG
Find a piece of scrapwood, cut it & shape it.
Note the flattened zone where the leaf will be fixed.
Drill two holes straith through that zone.
Oil to finish. Walnut is fine.

Make the Dish Table

DSC02980.JPG
DSC02981.JPG
DSC02982.JPG
DSC02983.JPG
DSC02984.JPG
DSC02985.JPG
DSC03075.JPG
DSC03076.JPG
DSC03102.JPG
Find a nice piece of hardwood - or make it  - and design a 'table' respecting the size of your leaf (make it too big the snacks will be wet, make it too small it will look ridiculous).
Use jigsaw to cut it out.
Use router to give it 3D.
Sand to finish.

You can also use a kitchen cutting board.

Find a nice way to attach the table to the support - in this case a piece of scrapwood.

Oil with natural oil (walnut, again). No synthetic stuff, birds will eat on it!

Assembling

DSC03173.JPG
DSC03171.JPG
DSC03172.JPG
DSC03103.JPG
DSC03121.JPG
DSC03105.JPG
Find a nice trunk and make a tripod to get it upside.

Fix the stem to the leaf.
Fix the leaf to the trunk.
Fix the table to the trunk.
The lantern is optional...

Every situation will be different. Set your creativity & inventivity free!

Ready for the snacks, ready for the birds & ready for some wintertime!

Hope you enjoyed it!

The Lantern Option

DSC03247.JPG
DSC03249.JPG
Just a tiny decorative touch to enjoy it during night.

Or to feed mice to the owls ;)