Bird Bath
To build this product you will need a large space to print with and the color of filament you desire. I personally prefer gray because the rocks look more natural but any color will do.
Printing the Base
The base should be printed using a decent infill for weight as this could blow away if you used the least infill possible. I would suggest at least 30 % infill or more.
I also suggest using .15 resolution to maintain smooth layers.
Downloads
Printing the Bowl
Use supports when printing this to make sure your bowl does not sag.
The bowl has an indent in the bottom to allow for the base to be connected properly.
Use infill 30% or higher and .15 Resolution while printing this item.