Bio Luminaire
![1.jpg](/proxy/?url=https://content.instructables.com/F60/TJAA/LWUP22B2/F60TJAALWUP22B2.jpg&filename=1.jpg)
This concept involves combining several raw materials to build a bio luminaire that may also increase the value of a desk lamp. Our concept, inspired by Zulu traditions, seeks to modernize culture.
Supplies
![Instructables_page-0002.jpg](/proxy/?url=https://content.instructables.com/FFW/DB17/LWUP22B8/FFWDB17LWUP22B8.jpg&filename=Instructables_page-0002.jpg)
You will need :
- A kettle
- Mortar and pestle
- Heart gun
- Craft knife
- High lighter
Preparation of Materials
![Instructables_page-0003.jpg](/proxy/?url=https://content.instructables.com/FHM/04AC/LWUP22BC/FHM04ACLWUP22BC.jpg&filename=Instructables_page-0003.jpg)
This image explains how to prepare and mix your material; it is crucial that you have someone with you to assist you during the procedure.
Mixing the Materials
![Instructables_page-0004.jpg](/proxy/?url=https://content.instructables.com/FCI/LZTR/LWUP22BK/FCILZTRLWUP22BK.jpg&filename=Instructables_page-0004.jpg)
If you're mixing the material by hand, keep a bowl of water nearby to rinse your hands so they don't dry out.
Forming of the Structure
![Instructables_page-0005.jpg](/proxy/?url=https://content.instructables.com/FKA/R6IC/LWUP22BT/FKAR6ICLWUP22BT.jpg&filename=Instructables_page-0005.jpg)
During this process, it may be difficult to level the material on the form's surface, so dip your palm in water and gently rub the material on the surface; using a little water softens the material and makes it easier to level.
Crafting the Material
![Instructables_page-0006.jpg](/proxy/?url=https://content.instructables.com/FSV/GE6Z/LWUP22C3/FSVGE6ZLWUP22C3.jpg&filename=Instructables_page-0006.jpg)
Please keep in mind that crafting the material might be tough and time-consuming; it is best to have someone with you to ensure that you do not hurt yourself. Using a highlighter to illustrate where to cut improves the process of cutting.
Final Crafting
![Instructables_page-0007.jpg](/proxy/?url=https://content.instructables.com/FRE/0S96/LWUP22CG/FRE0S96LWUP22CG.jpg&filename=Instructables_page-0007.jpg)
After crafting, allow the material to cure and harden.
Separating the Material From the Mold
![Instructables_page-0008.jpg](/proxy/?url=https://content.instructables.com/FUL/S209/LWUP22CW/FULS209LWUP22CW.jpg&filename=Instructables_page-0008.jpg)
Joining the material with glue speeds up the process; you may also attach it with the material, but it will take a long time to dry.