Bike Tube Tools Belt

Use an old bike tube to make a tools belt.

You will need an used bike tube, some duct tape and a pair of scissors.

Cut a long part of the tube, according to how long you want the belt to be.
From the remaining part, cut 3 pieces of about 15 cm.
Cut the rest of the tube in small rings shape (as many as you want).

On one end of the tube make a small cut, big enough for the other end to pass through.
Afterwards you can make a knot to fasten it.
Notice the position of the small pieces of the tube and of the rings. There they should be attached to the belt.

Use duct tape to attach the 15 cm pieces to the belt.
Run a piece of duct tape through the small tube and fasten it to the belt.

Use some more duct tape to make the bottom of the pockets.

From the pockets to the other end of the belt attach the rubber rings using duct tape.

This is how it looks like full with tools.
You can add some stickers to personalize it.