Bike Handle Bar Camera/light Holder

by cartwork-1990 in Outside > Bikes

1000 Views, 11 Favorites, 0 Comments

Bike Handle Bar Camera/light Holder

A PVC light/camera or whatever you want to put on it handle bar holder. Good for those who need to peek over their handlebar bags.

What You Will Need

1. PVC Pipe Fittings x 5

2. Hose Clamp x 2

2. PVC Cement

3. Dremel Rotary tool

4. Electrical Tape

I don't know the names of all the fittings, but I hope the illustration is enough to go by.

Cutting

Cut your T pipe in half and chuck the bottom bit away.Tape the middle of your handle bars with a few layers of the Electrical tape to help prevent damage when you install the Hose clamps in the next step.

Assembly

Place your half T Pipe over your handle bar and install over the top of that your 2x Hose Clamps and screw them in nice and tight. Next Glue the connector and receiver bits of your PVC parts and connect them all together. Wrap your holder in black electrical tape to dampen the blinding white that is PVC.