Bike Tool Holder

The other day I was biking to the pool, and I was trying to decide where to put my goggles. My temporary fix was to loop them around my water bottle holder, but obviously that was only a temporary fix. So when I got home, I thought maybe I could just cut the top off a plastic water bottle, and thus this project was born. Note: This is a very small holder. I would like someone to make a new project that makes a bigger holder with the same things, then, share it with me.

The only things you need are a plastic water bottle and scissors, and an object with a sharp point (such as a Swiss army knife) is recommended

To cut off the top of the bottle, simply cut as shown in the picture. If you can't (if the bottle is too strong) start by poking a hole with a knife. Then, put one of the scissor blades in the hole, and start to cut around. Congratulations! You're done!

Do exactly what the title says.

Again, do exactly what the step says (By the way those are my goggles in their case).

You can make a small planter by putting the cap on the piece of the bottle you cut off. Poke some holes in the cap, too.