Bicycle Brake Lights. (How To)

by tomas.nera.18 in Outside > Bikes

2633 Views, 52 Favorites, 0 Comments

Bicycle Brake Lights. (How To)

11160362_947226535318244_225370278_n.jpg

Are you bored of being invisible in the dark? Your problems are solved! This instructable will show you how to make braking lights. These lights will light up when you are braking, this will help people behind you know that you are slowing down. In 2012, 726 lost their lives in bicycle vehicle crashes. Lets save our lives by adding inexpensive braking lights!

Things You Will Need

11173458_947226228651608_521464915_n (1).jpg
11173531_947226291984935_931625784_n.jpg
11178667_947226298651601_1221111930_n.jpg
11165969_947226395318258_1696574506_n.jpg
11160085_947226245318273_275464873_n (1).jpg
Equipment
  1. Duck tape
  2. Some wires
  3. Red or orange led strips (I suggest to use 15cm strips for both sides)
  4. Microswitch
  5. A bike :D
  6. A battery pack or a rechargeable battery like a Ni-mih or a Lipo (Whichever one you prefer to use)

Tools

  1. Hot glue gun
  2. Soldering iron

Solder the Strips

11173468_947226341984930_1455522859_n.jpg

You will need to solder the strips in this faction.

Glue the Microswitch

11180094_947226375318260_1737562332_n.jpg

Glue the microswitch to the brakes.

(If brakes are different, then glue them next to the brake line)

Connect the Led Strips and Microswitch

Connect the led strips to the microswitch and the battery.

And You're Done!!!

If you have any questions ask me! (Sorry for any bad english, im from Lithuania)

I am planning on doing a tutorial for a RGB light on a bike.