Make Your Bicycle Sound Like a Motor Cycle - Turbo Spoke - Twin Version

A simple DIY project

an L angle was welded to the bicycle.

measurements given are indicative. pl improvise according to your need for the bicycle dimensions

I took a 32 mm pvc L angle coupler and took two small pieces of 32 mm pvc tube. refer measurements in the photo given. drilled three holes in the smaller one. one hole at the base and two through and through for securing the Rattler

I used an old pvc dusting powder bottle for the white plastic strips.

I used a hinge to eliminate the welding work.

I hope the images will be sufficient enough to explain how to do it. of course sky is the limit for improvisation of this pesky noise maker. kindly share your improvisations .