Beginer Electronics 1: a Simple Yet Fun Circut

How to make a simple circut in the form of a wire game. 
When the wire loop touches the wire an led lights up.

You will need
       TOOLS
Drill
Screw Driver
Wire Stripper or a Knife
Permament Marker
      PEICES
Thicker Wire
Thinner Flexible Wire
LED
Coin Battery
Platform For All Of It

Cut off about 10 inches of the thicker wire.

Mark where you want to drill the holes then drill.  Then stick the wire through and  bend the ends so it wont fall out.  And slap some tape on it.

Find a good spot for the LED and drill the hole for it and secure it with tape or hot glue.

You are done!  This is a simple circut that powers a simple circut.