Beer Opener

This tutorial wil show you how to make an automatic beer opener using arduino, 3D printing and laser cutting.

I didn't succeed in making the beeropener work properly because the servo motors I used are not strong enough.

possible solutions are:

• using a stronger servo motor
• using gears to increase the torque
• using a spring to help the servo motors

Parts list:

• 3D printed beer opener
• 300mm x 200mm x 6mm plywood
• 2x mg90 tower pro servo
• arduino uno
• 1k ohm resistor
• pushbutton

Used tools:

• 3D printer
• lazer cutter

Used programs:

• Autocad inventor (3D modeling)
• Illustrator (laser cutting)
• Arduino (code)

Files:

• code: http://www.mediafire.com/view/h1f5dyoesz60mb5/beer...
• 3D print stl file: http://www.mediafire.com/download/b3m285ncw4bvd07/...
• laser cut: http://www.mediafire.com/view/ax8b0b80i5w3a60/bee...

I made a 3D model in autocad inventor.

The beer opener is 3D printed.

File:

3D print stl file: http://www.mediafire.com/download/b3m285ncw4bvd07/beeropener.stl

The base is made from laser cut 6mm thick plywood.

file:

laser cut: http://www.mediafire.com/view/ax8b0b80i5w3a60/bee...

arduino code:

code: http://www.mediafire.com/view/h1f5dyoesz60mb5/bee...