Beer Holder

These beverage holders are pretty cool for the garage, backyard, camping, or tailgating. The beverage holder can be disassembled and reassembled very quickly for taking it traveling. This was pretty easy to make, I used 3/4 inch PVC pipe but could used what ever you prefer. I used bigger automotive holders so that they can hold a beer when it is in a koozie.

order them now

Tools:

jig saw

sharpee marker

tape measure

paint

screw driver

Supplies:

3/4 inch pvc pipe

3 "T" connectors 3/4 inch

5 3/4 inch pvc caps

2- automotive beverage holders

screws

Cutting and making this project is fairly straight foward. I cut the base pieces to be 6 inches long. You are going to need to cut 6 of theses pieces. Then i cut the long piece to the length of a good height to grab your beverage. I painted mine this is optional but I think makes it look a lot better. I screwed in my automotive holder's but might change it and use a bolt going threw both beverage holders so that I hand unscrew them for transportation.