Beebeecraft Tutorials on How to Make Pearl Bracelet

Summary: In today’s Beebeecraft tutorial, we are going to learn how to make a bracelet with purple pearl beads and clear glass beads. Get your DIY supplies and start with me now!

6mm round purple glass pearl beads

4x4mm faceted bicone glass beads

6x4mm clear pearl luster plated glass beads

0.8mm silver aluminum wire

40x0.7mm golden stainless ball head pins

5x0.7mm silver iron jump rings

12x6mm silver alloy lobster claw clasp

flat nose pliers

round nose pliers

side-cutting pliers

1st, use the 0.8mm silver aluminum wire and make a loop. You need a pair of round nose pliers to finish the loop.

2nd, thread a 6mm round purple pearl bead in the silver aluminum wire.

3rd, make a loop at the bottom of the pearl bead. Then wrap the two ends of the bead.

4th, cut the aluminum wire and finish a pearl bead link. Repeat the steps to make more links.

1st, thread a glass bead with a silver ball head pin.

2nd, cut the extra pin, and bend the wire to a loop.

3rd, repeat the same steps to make more glass bead links.

4th, use a silver jump ring to connect five links. Here I use three clear glass beads and two yellow glass beads.

1st, connect the glass bead links and the pearl links. You are supposed to use silver jump rings in between.

2nd, make the bracelet as long as you want. Then add two jump rings and a silver lobster clasp to finish your bracelet.

Tip: I also connect the links to my earring settings. Then I make a pair of beaded earrings.

Do you get the tutorial of this jewelry set now? Welcome to find more jewelry making supplies on Beebeecraft!