Batman Multilayered Art Laser Cut

In this blog, you can try to make a Batman Art. If you are a huge fan of DC and you like Batman. And you have a laser cutter and some plywood, you can try make one.

MATERIALS:

1. 3mm thickness plywood (45*45cm),
2. Glue,
3. Acrylic markers or spray paint

EQUIPMENT:

1. 20W NEJE Laser Cutter
2. Software: Lightburn

You will only need to cut with this file. As usual, I use light-burn as my laser working software. You can also use laser-grbl or other software you like to create laser crafts.

You can see there are different color once you upload. Each color need different color. In order to prevent the page you uploaded from not showing the corresponding color, I have provided text descriptions next to each layer. The plywood represents the layer that does not require painting because the color of plywood is very close to skin color.

Your machine should be large enough for laser engrave and cut a 45*45cm plywood sheet. Otherwise, you may need to adjust your file. I used NEJE MAX 4(750*460mm). If the range of your machine is not as large as mine, it is recommended to use thin materials（1-2mm plywood） for cutting to prevent the color from being too small to be seen.

Because each layer is basically only one color, I chose to spray paint directly for more convenience. Of course, you can choose to use acrylic markers for coloring.

Arrange them in order and fix them with glue. The order is orange, white, black, gray, skin color, black.(Clockwise according to the arrangement of preview file images)