Batman Mask Craft

I am making a batman mask using carboard , glue and tape . This is a kids friendly craft , well the inspiration is from a dc's superhero character batman

Cardboard , sccisor , tape , glue , cardboard

Cranium region of mask is shown in the pictures i am not using mesuring till now it is rough layout .

Horns are attached to the cranium region of cardboard mask , they are attached in same line and are mirror copies of each other .

Below cranium region the region which covers ears is attached they also are mirror copies of each other

Now the region which will cover the cheeks they are again mirror copies of each other

Mask is looking roughly complete here in this step , though the attachment of fore face area including nose and other part was really a tedious step i failed 3 times in getting nose at its right place , but so far it pretty much symmetrical .

Covering the whole mask with small pieces of white paper as i decided to colour it black later , though i changed my decision and covered it with black paper as the texture on colouring was not as i expected it to be

Covered it with black paper and edge will be done with electrical tape as it will give edges a smooth finish .

All the edges and joints are done with plastic or tape that is used to tie wires .

Well its complete now 🥳 . It take approx 3 days to complete it .

Well it is looking pretty huge on my yoinger brother as i was making it according to my head's size ....