Bathroom Pass
![IMG_2556.JPG](/proxy/?url=https://content.instructables.com/FWN/UXJ2/LIEKWW1T/FWNUXJ2LIEKWW1T.jpg&filename=IMG_2556.JPG)
3D Bathroom Pass: These are the steps to Making something 3D. I chose to do a bathroom pass.
Supplies
![3d printer.png](/proxy/?url=https://content.instructables.com/FE0/DWE5/LIEKZ70K/FE0DWE5LIEKZ70K.png&filename=3d printer.png)
![film 3d .png](/proxy/?url=https://content.instructables.com/F2O/OQSF/LIEKZ16M/F2OOQSFLIEKZ16M.png&filename=film 3d .png)
![tinkertad.png](/proxy/?url=https://content.instructables.com/FWD/RPW4/LIEKZHAI/FWDRPW4LIEKZHAI.png&filename=tinkertad.png)
![Canva.png](/proxy/?url=https://content.instructables.com/FM7/ZFHX/LIEKZNR5/FM7ZFHXLIEKZNR5.png&filename=Canva.png)
![is sc.png](/proxy/?url=https://content.instructables.com/FRC/VWWN/LILYSUA5/FRCVWWNLILYSUA5.png&filename=is sc.png)
![Prusa Sciser.png](/proxy/?url=https://content.instructables.com/FS8/H0CJ/LIEL0C1H/FS8H0CJLIEL0C1H.png&filename=Prusa Sciser.png)
3D Printer Filament - https://www.amazon.com/SUNLU-Multicolor-Filaments%EF%BC%8C-Pack%EF%BC%8C0-25-Transparent/dp/B0B38P446B
Tinkercad - https://www.tinkercad.com/
Canva - https://www.canva.com/login
Inkscape - https://inkscape.org/
Prusa Slicer - https://www.prusa3d.com/
Sketch Out Your Design
![Photo on 6-7-23 at 11.34 AM #3.jpeg](/proxy/?url=https://content.instructables.com/FE0/QR3N/LILYSVAQ/FE0QR3NLILYSVAQ.jpg&filename=Photo on 6-7-23 at 11.34 AM #3.jpeg)
Use a pencil, pen, and marker. Something to write with and draw out your design.
Go to Canva and Make a Design
![Canva Screen Shot.png](/proxy/?url=https://content.instructables.com/FAM/85OS/LILYSTXG/FAM85OSLILYSTXG.png&filename=Canva Screen Shot.png)
![c sc.png](/proxy/?url=https://content.instructables.com/FXP/D2LR/LILYSVCR/FXPD2LRLILYSVCR.png&filename=c sc.png)
Use the tools to design something to your or somebody's interest.
Go to Inkscape and Trace a Bitmap
![inkscape.png](/proxy/?url=https://content.instructables.com/FZL/N5LU/LIEKZWT6/FZLN5LULIEKZWT6.png&filename=inkscape.png)
![tinkercad.png](/proxy/?url=https://content.instructables.com/FAU/LYO3/LILYSUD3/FAULYO3LILYSUD3.png&filename=tinkercad.png)
When you want to trace a bitmap you have to take a screenshot of an individual thing. Right click then hit trace Bitmap.
When you are done tracing save it. The go-to Tinkercad and import the traced bitmap. Adjust it onto the image and then make it one.
![one tc sc.png](/proxy/?url=https://content.instructables.com/FJ0/PP6E/LILYSUMC/FJ0PP6ELILYSUMC.png&filename=one tc sc.png)
![tinkercad sc.png](/proxy/?url=https://content.instructables.com/FZ6/QKPA/LILYSULP/FZ6QKPALILYSULP.png&filename=tinkercad sc.png)
![PS.png](/proxy/?url=https://content.instructables.com/FEY/83CC/LILYSUSD/FEY83CCLILYSUSD.png&filename=PS.png)
When you're done use the Prusa slicer to slice the image. Then from there, you can use the 3D printer to print the prototype.
Final
![IMG_2632.jpeg](/proxy/?url=https://content.instructables.com/F1A/GI55/LIEKYELX/F1AGI55LIEKYELX.jpg&filename=IMG_2632.jpeg)
Then you will have your final project