Basic Wire Game

Basic game for soldering and learning about basic circuits

3 Screws

Wires

Solder

9v Battery

Battery terminal

Electrical tape

Buzzer

Switch Copper wire

Any surface to cut your project into

Cut four holes into the surface of the material used (wood) all adjacent to the corners. (I forgot to take a picture of the fourth hole before it was to late)

Screw the nails into three of the corners on the project, putting the copper wire under two of them to keep it secured. The third will be the wire to which will be the mechanism to make the game work. Finally the switch will be secured into the fourth hole.

Wire the circuit attaching the battery and securing it down. Attach the positive to the wired screw and negative to the switch. Next from the switch to the buzzer and then buzzer to either copper wire secured screw.

Play your game