Barn Found (super Cheap) Mandolin Restoration
by hacknmake in Workshop > Repair
2305 Views, 9 Favorites, 0 Comments
Barn Found (super Cheap) Mandolin Restoration
![IMG_0988.JPG](/proxy/?url=https://content.instructables.com/F97/QBT8/IYGFVGCU/F97QBT8IYGFVGCU.jpg&filename=IMG_0988.JPG)
Hi guys, in this instructables I am gonna show mandolin restoration less than 5 dollars. I only used some sandpapers a little coffee and indian oil that I found in home. I was thinking about finishing the entire mandolin with shellac(sunburst) but I didnt have much time and finishing with oil could be much faster.
Removing the Pickguard and Sanding the Body
![IMG_0970.JPG](/proxy/?url=https://content.instructables.com/FBL/2CXC/IYGFVGSR/FBL2CXCIYGFVGSR.jpg&filename=IMG_0970.JPG)
![IMG_0977.JPG](/proxy/?url=https://content.instructables.com/F3W/J4VT/IYGFVGTQ/F3WJ4VTIYGFVGTQ.jpg&filename=IMG_0977.JPG)
![IMG_0978.JPG](/proxy/?url=https://content.instructables.com/F6X/HIL4/IYGFVGW8/F6XHIL4IYGFVGW8.jpg&filename=IMG_0978.JPG)
![IMG_0976.JPG](/proxy/?url=https://content.instructables.com/FYL/7XC5/IYGFVGTO/FYL7XC5IYGFVGTO.jpg&filename=IMG_0976.JPG)
First thing I did was removing the all remaining glue residues form the pickguard. Then I sanded the headstock, neck and front sound board. Since the back and side finishes were ok didn't remove them. I lightly sanded the front part as a result I couldnt manage to remove the pickguard trace but its was ok for me. I sanded frets to give a shiny look with a fine sand-paper.
Hardware
![IMG_0983.JPG](/proxy/?url=https://content.instructables.com/FB7/8CZK/IYGFVGYU/FB78CZKIYGFVGYU.jpg&filename=IMG_0983.JPG)
![IMG_0979.JPG](/proxy/?url=https://content.instructables.com/F6X/51FF/IYGFVGWP/F6X51FFIYGFVGWP.jpg&filename=IMG_0979.JPG)
![IMG_0984.JPG](/proxy/?url=https://content.instructables.com/FPS/JVJB/IYGFVH2R/FPSJVJBIYGFVH2R.jpg&filename=IMG_0984.JPG)
After some search, I found tuning machines and metal tailpiece those belong to the mandolin. I cleaned and oiled mechanical parts and dipped the plastic peg heads into a dark coffee to give them a brownish color (like old mandolins). I brushed the metal tailpiece and attached with some screws.
Finishing and Final Assembly
![IMG_0989.JPG](/proxy/?url=https://content.instructables.com/FI7/YSSO/IYGFVGHE/FI7YSSOIYGFVGHE.jpg&filename=IMG_0989.JPG)
![IMG_0990.JPG](/proxy/?url=https://content.instructables.com/FR5/7C9J/IYGFVGHO/FR57C9JIYGFVGHO.jpg&filename=IMG_0990.JPG)
![IMG_0991.JPG](/proxy/?url=https://content.instructables.com/FKL/MASB/IYGFVGHS/FKLMASBIYGFVGHS.jpg&filename=IMG_0991.JPG)
![IMG_0986.JPG](/proxy/?url=https://content.instructables.com/FFD/YPKM/IYGFVG2G/FFDYPKMIYGFVG2G.jpg&filename=IMG_0986.JPG)
![IMG_0987.JPG](/proxy/?url=https://content.instructables.com/F5L/D9NE/IYGFVG2I/F5LD9NEIYGFVG2I.jpg&filename=IMG_0987.JPG)
I wanted to finish it with shellac but i would like to restore it with a small budget. I finished the sanded parts with indian oil which was bought as massage oil. I applied indian oil with a small cotton rag. It worked well. The mandolin sounds bright and the sustain is good.