Bamboo Candle Holder

This is from animal crossing new horizons. I hope you enjoy because this was my first one.

3-D printer, Green wire for 3-D printer, computer to use Tinkercad, and tanish paint.

once you get onto Tinkercad then go into new folder. then take a cylinder and make it 40.00 by 40.00 by 40.00. or 40.00 lenght by 40.00 width by 40.00 height.Then make a copy so then when you when you cut it it makes a bigger holder.

change the color to green. you can do whatever type of green you want but personally the green above is probably the one I like the most. then cut the top of one of the cylinders side to make a slant. you can use what ever you want to cut it but I used the Wedge. Then I lined up the top edge after rotating it. then I cut it. but there was a little extra so I just used the square shape to cut it off. then I raised it to 50.00 height. I hope this doesn't happen to you.

use a cylinder that's 30 by 30 by 80. then put it inside the middle of the first cylinder that we cut early.and raise it about 7.00 off of the ground.

Add the first cylinder that we just cut and add it to the second cylinder. then add a ring to the middle with the dimensions 42.00 by 42.00 and do the lightest green color. Then print and paint the top edge tan. then add a candle.