Balcony Bridge/Bird Feeder

by DirtylilNinja in Outside > Backyard

937 Views, 12 Favorites, 0 Comments

Balcony Bridge/Bird Feeder

IMG_4009.JPG
IMG_4011.JPG
IMG_4010.JPG
74C2AC90-F561-449A-AD72-71F826729323.jpeg

I wanted to make some kind of bird feeding trough for my balcony to go along with my hummingbird feeder to get some bigger birds hanging out my windows. I decided using leftover foam from my last project was the way to go and I like the idea of miniature stuff so I decided to build a bridge with a trough to lazily dump bird seed in.

Supplies

IMG_3898.JPG
IMG_3896.JPG
IMG_3897.JPG
IMG_3907.JPG
  • Foam (I think it was $8 a sheet for a 2ft x 2ft square, I used 1 1/2 boards and have a good amount leftover for future builds)
  • Hot glue gun and glue
  • toothpicks or hobby sticks for reinforcement (very much optional, I just wanted extra security since its clamping to a third story balcony)
  • Acrylic Paints, cheap and durable I just used Black, White, Red, Yellow, and Blue
  • Cutting tool, I used a box cutter
  • string or ruler for loose measurements
  • sharpie or pen to mark the foam
  • Your choice of bird seed as I am no expert!

I had all this lying around so it was basically free, but would probably cost about 20$ if you needed to buy everything if you went to a dollar store for the glue gun and paints.


Draw and Plan!

2CF9A193-FD4A-46BC-A956-113EA86FB98A.jpeg

Design what kind of bridge you want to make! I like long arched bridges with brick/stone work on the sides and thought lil castle battlements would be cool to add and learned they're specifically called this -> "An indented parapet at the top of a wall, at first used only in fortified buildings for purposes of defence against assailants, but afterwards in the architectural decoration of ecclesiastical and other edifices. The raised parts are called cops or merlons, the indentations embrasures or crenelles" according to the oxford dictionary for battlement.

I originally wanted to build a castle at the end of the bridge to sit against the wall, but spent most of the day building the bridge and I get burnt out of cutting and detailing foam, especially a project that is already four feet in length!

Get Some Measurements

IMG_3893.JPG
IMG_3894.JPG
IMG_3895.JPG
IMG_3899.JPG

I refuse to be too accurate when it comes to art projects. I measured the width of the railing with a string and marked it with my sharpie to check that I make the bridge walkway narrow enough for the legs of the bridge to grip the build tightly to the balcony railing.

I then stretched the string vertically to decide how tall I wanted the bridge to rise up from the bottom of the railing and marked that distance as well.

Lastly I laid down the string to mark the length of the bridge but ultimately threw that measurement out and just made it the length of my two foam boards laying end to end. (4 feet)

Slice and Not Dice and Glue

IMG_3900.JPG
IMG_3901.JPG
IMG_3903.JPG
IMG_3904.JPG
IMG_3905.JPG
IMG_3906.JPG
IMG_3908.JPG
IMG_3909.JPG
  • mark your height measurement a few times along the length of the board and draw a straight line using the string or a straight edge, or a ruler if you have one. Since I'm making this to look like weathered stone/bricks I'm not too concerned with how straight or accurate I am with my cuts.


  • I decided to score the ends of my board to increase the surface area that is getting hot glued and hopefully makes a more secure bond.

I made a mistake of using the HOT setting on my glue gun and it melted into the foam!! Use the warm setting to avoid my mistake :/

  • I stuck a couple of toothpicks into the ends and shoved the matching ends together to make a janky dowel joint and held it together for a minute to let the glue cool enough to bind the foam strips together. then repeated so I had two sides to my bridge.

Cutting the Arch and Walkway

IMG_3913.JPG
IMG_3914.JPG
IMG_3917.JPG
IMG_3921.JPG
IMG_3922.JPG
IMG_3910.JPG
IMG_3911.JPG
IMG_3924.JPG
IMG_3926.JPG

This was kind straight forward, I marked how tall I wanted my arch and how wide I wanted it. Then free-handed a smooth archway connecting everything with some sharp drop-offs near the end because I like how it looks. I then measured the width of the walkway on the scrap pieces of foam, cut, and glued just like the sides of the bridge.


Afterwards I decided what I thought looked good for a depth of the walkway and glued the sides to the walkway and pressed the whole thing together between my legs for a minute

Cutting the Merlons and Bulking Them Out

IMG_3929.JPG
IMG_3930.JPG
IMG_3931.JPG
IMG_3932.JPG
IMG_3936.JPG
IMG_3937.JPG
IMG_3938.JPG
IMG_3940.JPG

I set the bridge on the railing to make sure it was VERY snugly holding onto the metal, I'm confident that it won't gett knocked off unless there's tornado level winds picking up, and if that happens I'll just bring it inside before hand. Worst case a lightweight piece of foam with so much surface area to weight it'll just dance in the parking lot until I fetch it.


I brought it inside and measured for real for the first time and marked repeating 1.5 inches, 2 inches until I hit the end of the board. I then free styled the depth to something that I liked the profile of. I cut these Merlons out with a box cutter, took a while.


With the cut out scrap I cut them in half lengthwise to glue onto the Merlons to add some extra heft and dimension on the top of the bridge.

1 Million Bricks and a Rock

IMG_3943.JPG
IMG_3944.JPG
IMG_3945.JPG
IMG_3946.JPG
IMG_3947.JPG
IMG_3948.JPG
IMG_3954.JPG
IMG_3957.JPG
IMG_3958.JPG
IMG_3953.JPG
IMG_3955.JPG

This was mildly therapeutic. using anything with a point (a hobby stick for me) I scraped the lines of brickwork into the sides of the bridge.

I made a outline of the arch first so it wasn't too terrible repetitive and put brick lines in there too

after the bricks were imprinted on I found some textury rocks and beat the hell out of the sides of the foam to make some interesting texture, you can really rough it up and I even went over edges so it appeared like a very weathered but well built bridge once painted.


I also scratched and beat up the walkway and battlements to add interest of texture

Get Paint on Your Hands and Bridge

IMG_3961.JPG
IMG_3959.JPG
IMG_3964.JPG
IMG_3968.JPG
IMG_3966.JPG
IMG_3967.JPG
IMG_3969.JPG
IMG_3970.JPG
IMG_3971.JPG
IMG_3972.JPG
IMG_3974.JPG
IMG_3978.JPG
IMG_3979.JPG
IMG_3980.JPG
IMG_3985.JPG
IMG_3984.JPG
IMG_3987.JPG
IMG_3988.JPG
IMG_3995.JPG

HAH you thought we would paint, fool! Use something rough or sandpaper if you're fancy and sand off the dangly foam bits

once it's smooth enough for you're liking drown that sucker in black paint thoroughly. Get it in all the cracks because we'll be progressively dry brushing it.


  • black base coat
  • dry
  • gray/grey secondary coat
  • dry
  • highlight random bricks with muddy red and yellows
  • dry
  • dry brush with white
  • splatter paint some green and highlight with yellow to make moss growing on the sides

Display Your Bridge Proudly

IMG_3998.JPG
IMG_3999.JPG
74C2AC90-F561-449A-AD72-71F826729323.jpeg
409EB487-0383-4E39-85EF-07A6B2F481EC.jpeg
8982A310-079A-4456-8413-1264298C4040.jpeg
D7CA51B5-EC7E-4696-8FA3-B02C6061E6CF.jpeg
IMG_4010.JPG

Since we know it fits perfectly on the railing, go get some bird seed of your choice and fill up the trough. I put some on the merlons to hopefully attract some birdies but I'll have to see how successful this is at bring in some more life to my balcony. If anything it'll make a great Dungeons and Dragons bridge asset if I start playing again


Hope y'all enjoyed the project details!