Balance Board
I wanted to get a balance board the ones i found online were very expensive. These are fun to have around and are good for balance. This project is very easy to make and also pretty cheap to make too.
Get Supplies and Tools Needed
Supplies
3 inch pvc pipe 2 ft long
2 peice of wood 2 inch wide length of skate board
screws for wood
skateboard deck
4 screws
Tools
saw
screw driver
sand paper
3 inch pvc pipe 2 ft long
2 peice of wood 2 inch wide length of skate board
screws for wood
skateboard deck
4 screws
Tools
saw
screw driver
sand paper
Assemble
take the 2 pieces of wood and screw them into the skateboard deck from the top two screws in each piece of wood is enough. find the right length pvc pipe or cut one to the right size.
Closing
Everybody who comes over wants to try this balance board out. For beginers you can you a flat board instead of the round pvc. For more advanced you can squat down while balancing. Rolling on carpet will make it easier as compared to a wood or cement floor.