Balance Bike With 14 Inch Tyres

by Prem K in Workshop > Tools

1884 Views, 18 Favorites, 0 Comments

Balance Bike With 14 Inch Tyres

IMG_20171129_165453.jpg

Hey guys I have made this balance bike for kids and it really works well, hope you guys enjoy.

What all things do you need?

1. 12mm Plywood - You can take birch ply but I have taken a normal one.

2. Hacksaw - for cutting ply into pieces

3. Screws

4. Hand drill/ Powered drill

5. 2 - 8mm nut and bolts each 5 inches long

6. 14 inch wheels and tyres

7. Handlebar - of any cycle but it should be straight

8. 1 - 12mm nut and bolt - for steering

NOTE : All the measurements are in MM or MILLIMETER.

Fork

IMG_20171129_171843_01.jpg

Cut 2 pieces of the fork.

Main Body/ Chassis

IMG_20171129_171848_01.jpg

Cut two pieces of the frame.

Seat Post

IMG_20171129_171901_01.jpg

Cut only 1 piece and make holes according to the diagram in the photo.

Fork Joinery

IMG_20171129_171906_01_01.jpg

Make two pieces of it and screw it in between the two pieces of the fork in which one piece should be above and the other one below it by 90mm.

Finish

IMG_20170617_185342.jpg
IMG_20170702_185125.jpg
IMG_20170712_142702.jpg
IMG_20170712_164631.jpg

After i assembled everything, i gave it a paint job and it's done!!!