Baby Doll Lamp

by SteCla in Circuits > Reuse

1334 Views, 3 Favorites, 0 Comments

Baby Doll Lamp

IMG_20190502_151747837.jpg

This is a very short instructable about my baby doll lamp. I used the head of this baby doll for my "Creepy Baby Wacky Waving Inflatable Arm Flailing Tube Man" ( https://www.instructables.com/id/Creepy-Baby-Wacky-Waving-Inflatable-Arm-Flaling-Tu/ ).

Mechanics

IMG_20190224_165052595.jpg
IMG_20190224_165048017.jpg
IMG_20190224_165043980.jpg
IMG_20190224_165702511.jpg
IMG_20190224_170219749.jpg

The doll's head has been removed. Next you might need to remove a lot of excess plastic in the body. Especially if the doll had water-piss mechanics, which mine had. You can use whatever you have to remove it like clippers. I used a hot knife to melt stuff but the fumes are probably extremely toxic. Be careful.

You also need to drill a hole at the bottom.

Buy a lamp holder, for example at ikea (HEMMA): https://www.ikea.com/be/nl/producten/verlichting/... .

You also have to remove a piece of the back since you have to detach and re-attach the socket of the lamp holder in order to fit it in the doll.

Final Result

IMG_20190224_191904420.jpg
IMG_20190502_151747837.jpg

Buy a bulb, screw it in, tadaaaa.