BUSINESS CARD HOLDER MADE FROM OFFICE ACCESSORIES IN LESS THAN 5 MINUTES

Creativity challenges your brain :)

First step is to choose your accessories:

- 2 business cards as cover

- 2 plastic covers for card access

- 3 rubber bands

- 1 paper clip

Let's start assembly :)

Place the business cards that you have chosen as covers into plastic covers like you see in the picture.

Now you have the covers for your Business Cards Holder.

As you can see in the picture, the next step is very easy.

Take 2 of your chosen rubber bands, and link the covers you have created in the previous step.

Create bonds at each limit of the covers by making an "x" from the rubber band.

At the end of this step, you should have your covers bonded, like a book cover :)

You have to secure the sides, from preventing business cards to slip from your holder.

Take the 3rd rubber band and drag it into the plastic covers side holes and link them with the paper clip.

Don't forget to follow the pictures.

You're almost done :)

Hey, I told you you're almost done :)

Check your holder. On the sides, it should look like in the pictures.

Now, you have secured your bottom holder, when you linked the 2 covers with the rubber band.

If you will open your holder from the top, you can place your business cards.

To secure them into the holder, either you place them under the rubber bands, or simply drag the rubber bands on the opposite cover that it holds.

Congratulations!!! You have now hand-made a very cheap BUSINESS CARD HOLDER in less than 5 minutes! :)

See you next project.