BMW X3 Angel Eyes Installation & Retrofit
90 Views, 0 Favorites, 0 Comments
BMW X3 Angel Eyes Installation & Retrofit
This article show the guide on how to install and retrofit BMW X3 Angle Eyes
Obtain a Good Power Source for the Angel Eyes
Step 1 is to obtain a good power source for the Angel Eyes. Below is a picture of the ECU. Here I tapped into the accessory power supply. This is what makes the angel eyes light up when the key is turn to position 2.
Relay, 12V Power and Ground.
Relay, 12V power and ground.
Everything Wired. Fingers Crossed. It Works!
Everything wired. Fingers crossed. It works!
Back of Headlights
Back of headlights
Everything Removed From Headlights.
Everything removed from headlights.
I Was Scared Shitless During This Part. Headlight Housing Apart After Baking in Oven @ 200F
I was scared shitless during this part. Headlight housing apart after baking in oven @ 200F
Amber Reflector Removed.
I Used SiliconII (operating Temperature Up to 400F) to Glue on the Angel Eyes
I used siliconII (operating temperature up to 400F) to glue on the angel eyes
Housing Back Togeather. No More Ugly Amber Reflector!
Housing back togeather. No more ugly amber reflector!
BMW X3 Angel Eyes Installation & Retrofit Complete!
BMW X3 angel eyes installation & retrofit complete!