BLOWTORCH GUN
hello guys, I want to show you how to make a blowtorch gun. it's super easy to make and it is so much fun to use it. it also can be used as a pop gun. it is very powerful so please be careful with what you shoot at.
WATCH VIDEO!!!
I suggest you to WATCH VIDEO. to see this gun in action as well to see step by step video instructions.
if you like projects like this, than make sure to subscribe to my YouTube channel ZE so you don't miss my weekly uploads.
So for this I used:
X2 90° angle joints for plumbing. (to fit blowtorch)
Blowtorch :)
pvc pipe
hard plastic bottle
grapes. :)
handy to have drill and hot glue gun. as well as electric tape.
first thing I did I joined two plumbing joints with electrical tape. like you see in the picture. then attached it to blowtorch like you see.
now some drilling. first I drilled a hole in the bottles lid. hole big enough to be able to fit pvc pipe that is gonna be a barrel. and after sealed it from inside and outside with hot glue.
then I drilled bottom of the bottle to be able to attach bottle to blowtorch, to a plumbing joint. so hole is same size. then seal it with hot glue again.
This is pretty much it. it's that simple to make. and it's lots of fun to shoot.
Now you can press trigger on the blowtorch and you will hear gun pop. (really loud) it's louder without barrel attached. Place a grape into a barrel and screw it onto a gun. than press the trigger and watch grape fire. if you shoot it against hard surface grape will smash. there will he nothing but juice left. :)
If you liked this instructable check out my YouTube channel ZE.
also see this detailed instructions on how to make this and other cool projects like this.